Push Pull Silt Fence Plow
Push Pull Silt Fence Plow
Dedicated Quick Attach Skid Loader Hitch
Provides easy on and off. Both have retractable legs to keep the machines steady when unhooked.
Push Pull Model with 36" fabric chute
Swing Dampening Brake
This simple design allows you to adjust the amount of tension on the chute when it is out of the ground. It prevents slapping of the chute when transporting the machine. Simply tighten or loosen the bolts to allow more or less tension.
Forklift/Hoist Slots
Easy moving. 6”x 4” x 3/8” Tube Steel Main Frame for the strongest built plow in the industry.
Simple Rotary Offset Design
Allows you to quickly offset to either side of center to pull, and to swing the machine over either side of center to push the silt fence plow forward. By aligning two pins, the machine's offset position can be changed while it is in the ground.
90° Rear Pivot Swing
The rear pivot can swing 90° either side of center, and provides the tightest turning radius available. Massive 2” x 8” pivot pins ensure years of dependable service.
Fabric Tension Spring and 16” Diameter Fabric Plates
Simple, easy-to-adjust fabric tension spring allows for quick adjustment. 16” Diameter fabric plates prevent the fabric from telescoping over the plates during installation.
Spring Loader Coulter
Comes with hardened steel blade; cuts through tree roots and vegetation.
1" Moleboard Knife
This is standard equipment. Stainless steel parts in key wear areas, and a specially designed fabric chute installs fabric in a tight consistent snag free manner.
Replaceable Hard Surface Plow Point
Designed to disrupt the soil upward for easier pulling and proper silt fence installation.
Push Pull Model in Pull Position
Push Pull Offset to the Right Hand Side
Push Pull Offset to the Left Hand Side
28" Offset from Center in the Pull Position
46" Offset from Center in the Pull Position
Cutting Coulter and Replaceable 2" wide Self-Sharpening Cutting Tooth
The cutting tooth can be bought at any dealer who sells replacement cutting teeth for excavators or skid loaders; it is not proprietary to "The Silt Fence Plow". The coulter cuts through tree roots, grass and other material that can hang up around the moleboard knife.
Difference between the 48" and 36" Fabric Chutes
A 36" chute is the most common height of silt fence installed. The 36" chute will install 36" tall and shorter fabric. The 48" chute will install 48" tall and shorter fabric.
Features
For all of your push pull silt fence needs, contact the experts at Silt Fence Plow today.
Please Note: Due to McCormick Equipment’s continual improvements of its products, production changes may cause your machine to appear slightly different in detail.
View Standard Features View Brochure
Optional Equipment
TSA-1051 – Three Point Hitch to Skid loader Adapter Bracket
The TSA-1051 Three Point to Skid loader Adapter Bracket allows a dedicated skid loader mounted machine to be operated off the three point hitch of a tractor. It has Cat I and II three point hitch mountings. A hyd. top link is required when using the TSA-1051 mounting on Silt Fence Plows and is recommended when using it on any other skid loader attachment.
RWU-1056 Wire Unroller
The wire unroller mounts on either side of the machine. It allows a roll of wire to be unrolled as the fabric is being sliced into the ground. It will not install the wire into the ground. If you need to install the wire and the fabric into the ground together look at the Enfencer machine on our website. With the Push Pull model the wire unroller can only be used in the backwards position.
FC-1136 - 36" & FC-1148 - 48" Fabric Curtains
The fabric curtain is a plastic divider that separates the fabric so it does not rub against itself when going through the fabric chute. It is only needed when using non woven fabrics to prevent the fabric from grabbing itself and pulling down. With the slick woven fabric, the divider is not needed.
