515.669.3427 Chris@SFP36.COM Login
  515.669.3427 Chris@SFP36.COM
Dealer Login

Economy Silt Fence Plow

Model ES-SFP36 Dedicated Skid Loader Mounted Economy Silt Fence Plow with 36" Fabric Chute

Please Note: A Hyd.Top Link cylinder is required for proper operation of “The Silt Fence Plow” when attached to the 3 point hitch of a tractor. Approved for a Minimum of 35 HP FWD tractor with a minimum weight of 3,000 lbs and up to 60 HP FWD tractors. Approved for use on up to 75 Hp tracked skid loaders.
Patents 7,144,202 - 7,044,689

Standard Features

  • Designed for contractors who need to install silt fence periodically
  • Dedicated Cat I and II three point hookup
  • Center pulls only- the Economy Silt Fence Plow will not offset
  • 48" Model can install 48" and shorter silt fence material
  • Front pivot design allows for easy turning
  • 36” fabric chute can install 36” and smaller fabric sizes
  • Fabric Chute has stainless steel parts in key wear areas
  • ¾” thick mole board knife
  • Spring loaded 16” diam. cutting coulter cuts through soil, trash and treeroots
  • Grade 5–5/8” x 3½” shear bolt with hardened bushing
  • Tube steel A–framewith 1” x 4” stringers
  • Replaceable 2” wide hardened knife point
  • Fabric tension Spring with 16” diameter fabric retention plate
  • Up to 1000’ rolls of silt fence material can be used
  • Can Install silt fence 6” deep to 20” deep
  • Retractable storage legs with pads for stability
  • Quick attach skid loader mounting on the dedicated skid loader model

 

Specifications

Model ES-SFP36
Height  74"
Width 61.5"
Weight 621 lbs.
Length 95.5

Model ES-SFP48
Height  74"
Width 61.5"
Weight 731 lbs.
Length  105.5"

Model ET-SFP36
Height  74"
Width   55"
Weight  635 lbs.
Length  94.5"

Model ET-SFP48
Height  74"
Width    61.5"
Weight  704 lbs.
Length 104.5"

View Brochure

Features


Optional Equipment


HTL-1055 – Hydraulic Top Link Cylinder11

The hydraulic top link cylinder goes in place of the rigid top link on the tractors 3 point hitch. It is required with the three point mounted plows for proper operation. It allows the angle of the knife of "The Silt Fence Plow" to be ajdusted so the plow does not nose dive or come out of the ground.

CPS-1050 – Center Pull Skid Loader Mounting Plate

The skid loader mounting plate can be pinned on the three point hitch model plows to allow them to be pulled backwards with a skid loader.

FC-1136 - 36" & FC-1148 - 48" Fabric Curtains

The fabric curtain is a plastic divider that separates the fabric so it does not rub against itself when going through the fabric chute. It is only needed when using non woven fabrics to prevent the fabric from grabbing itself and pulling down. With the slick woven fabric, the divider is not needed.